48+ How To Measure For Bow Draw Length 2022. The picture shows the draw lengths that you should choose. While drawing the bow, keep the endpoint of the arrow on your chest just below the collarbone.
Now quickly move the bow up so that it touches the rest. The result is your draw length. When the measurement is found (in inches), divide that number by 2.5 and the resulting number will be proper draw length.
After Getting The Value, Add 1 3/4.
Then note the measurements and add 2 inches (5.1 cm) to this length. In this segment, you will learn from john dudley the. For almost all shooters, this method is very accurate and the most simple route.
Divide Your Draw Length By 2.5.
This is answer is now your draw length. The length of a recurve bow is measured from limb tip to limb tip, following their curvature along the inside edge of the bow. You have to keep measuring from the knock point to the deepest grip part above where the arrow exceeds the riser.
A Piece Of Tape Will Do Fine.
Ask a friend to mark on the arrow where it goes past the riser. Mark that point where the tip of your middle finger touches the arrow. 26 inches + 1 ¾ inches = 27 ¾ inches.
But Do Not Make Another Permanent Mark Yet.
For instance, my wingspan is 72.75 inches, so 72.75/2.5 is 29.1” and i shoot a 29” draw length. Now quickly move the bow up so that it touches the rest. Before buying or shooting a bow, you first and foremost need to know what your draw length is.
The Picture Shows The Draw Lengths That You Should Choose.
Take this number and divide by 2.5. Deduct the length by 3. After attaching the bow square to the opposite side of the bow string, measure and note how deep it is.