15+ How To Reset Toyota Tacoma Maintenance Light New. Then i use the arrow to navigate through the main menu and get to the ⚙️. Check to see that it is in this position rather than the “start” one, which is the one that activates the engine.
Turn off your car’s engine and press the reset button of the trio meter. So the first thing you should do is: To reset the maintenance light put the vehicle in the acc position.
Then Select The “Maintenance Reset” Option And Press The Toyota Select Button.
This is easy to reset the maintenance light using the trip button. How to reset maintenance light toyota. If you notice the light is still on, repeat this process only one or two more times to turn off the maintenance light on your toyota rav4, highlander, camry, corolla, or any.
To Turn Off The Service Required Light In A Toyota:
Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. While holding down the reset button, move the key to the “on” position with very light pressure. Continue holding the odometer button for 10 seconds.
Next, I’ll Use The Arrow To Scroll Down To.
Keep pressing the reset button and gently press the on button. Keep holding that reset button until you see the maintenance light turn off on the dash. It will turn back on the next time that it.
This Button Is Usually Labeled Odo/Trip.
Press the odo/ trip button briefly to make sure you set this thing to the trip a. You take the service of a toyota dealership for the oil change, they will reset maintenance light toyota for yourself. Put the key in the ignition and turn it to the run position or press the start button twice.
Turn The Vehicle Off And Press The Trip Meter Reset Button.
Once off, release the odometer button and start the. The odometer should display the miles, not the trip meter. First, insert the key and put the ignition on.
